Search results

I have an LDT-465-1D that was rebuilt by the military in the early 90's. When rebuilt new injectors were installed. They are the newer 2-hole AMBAC AKN 130SM 6844B2 injectors. Military part #12354296. The injectors are stamped 11-90. I am overhauling my truck and took the injectors to a...

Does anyone have a digital copy of TM 9-214, Inspection, Care, and Maintenance of Antifriction Bearings? I am working on a number of different vehicle projects and would like to have a standard to go by to determine the condition of bearings.

The other day I was accelerating up a hill in third gear and as I shifted into 4th the 2 rear axles stopped turning. The truck would move forward or backwards a few feet, but something internally jams and it stops. I put the transmission and transfer case in neutral and the engine runs fine...

I rebuilt the air pack in my Deuce and after putting it back in, brake fluid pours out the slobber tube by the air filter. When manually bleeding the brakes with no air pressure, the fluid level rises in the tube as you bleed and will start flowing out after a few minutes of bleeding the...

I posted this elsewhere but didn't want hijack anyone's thread:-D I rebuilt the air pack, master cylinder, and all wheel cylinders on my M35A2. I also added a fluid reservoir under the hood. I am changing to DOT 3 since DOT 5 is not available here. I put everything back together and filled...

I am adding a brake fluid reservoir on my truck and am having trouble coming up with a hose to run to the master cylinder. What hoses are compatible with DOT 3 brake fluid? The local parts store claimed that power steering hose would work. Specific parts can sometimes be hard to find here in...

I was down in a sand pit this morning getting a load of sand and I went to lock my front hubs to put it in 6WD. When I turned the hubs the right hub did not stop at the "Lock" position. I could feel the correct position though and engaged the front axle and drove out of the pit. I remember...

Hello, I am in Belize with my 1966 M35A2 and I have a problem. The rubber bushing came off the stud on the left torque rod under the center of the spring. My front rear axle then shifted forward. The truck is in the road in a Mayan village. If I attempt to move the truck I am afraid the left...