Search results

I have been trying to reach Red River. It appears they are gone. The website is gone and phone disconnected. Sorry.

I checked the forum every few months. Nothing. If somebody had been even curious a dialog would have started. All that ever appeared were some posts about thin-skin vehicles like the above. I have to assume there is no market for replacement M-41 pads. If you look back you may find the...

Thanks for the note on M548 pads. They have been available for many years. To my knowledge they have no similarity to M-41 pads. 2-part urethane products have serious issues with adhesion to the old pad shoe as well as durometer and tensile strength. Several people have tried 'recapping' and...

Time has passed and there was ZERO interest in my M-41 replacement pads. I have scrapped all 2000 pieces and given up. Everybody loses. John Kessler

The first prototype modified Bradley pad is done. Fits nicely into our spare track shoe (off the LF fender of the M-41). I will be doing several pre-production pads shortly and taking photos. User will reuse present securing nut. I have over a thousand NOS Bradley pads to work with. No more...

OK We sliced the corners off the Bradley track pad It fits well and looks acceptable in our M-41A1. We are now getting a special adapter nut made to secure it in the M-41/family track segments. Will advise as project advances. We are acquiring Bradley pads in 200 lots. Final product should...

I am convinced that just playing a acetylene torch on the back of the shoe will melt/release the old rubber block, but may make a big stink. Heat needed to release rubber will be far below that which will damage the steel backing.I guess the time has come to do some genuine experimentation...

There is a WORLD of difference between half-track bands and heavy molded blocks. As I pointed out in my letter, in order to remould any track blocks you first must remove the old rubber. Rubber compound formulation can be determined by the original or current Mil Spec. Please examine some...

OK We have a M-41A2 with rubber chevrons worn flush to the cleats/grousers. Years of research reveals NOTHING available anywhere at any price. I submitted a worn sample to the leading construction vehicle shoe maker but they decline to enter production for a few hundred 'orphan' parts. They...

I understand that in certain duty stations in Germany and Korea they installed 24V sump heaters powered by the APU. That sort of thing might be dead-easy to install...even in 115 or 230. I bet you will find the access cover for installing a heater directly in the sump. Our MTU 538s would not...

Just curious...Do you have hulls for your 1790 packs? I drove M-47 as a teenager at an Army Reserve armory, 1959. The unique 'side-stick' steering is memorable. The thing has some WEIGHT. We have a nice M-41 here and it has become (after lots of hours work) a treat to drive. A great...

Right you are! I just assumed they had to get all power possible out of the 1790 as they did the 895. Only the late injected 1790 had the supercharger. Do you know these Stromberg carbs are also on the GAA? Mags also, I believe. All are fabulous engines...nothing in the world like them. And...

The big Continental air-cooled gas engines are 895 (opposed 6) or 1790 (V-12) All 1790s are crankshaft-drive centrifugal supercharged. Some 895s are natural single carb.

I've had my hands on these machines a bit. Before installing a mag spin it up with a power drill. If no fire, it is usually the magnets. After many years they lose and must be recharged. Many aircraft mag shops can recharge these units. Condenser must be checked and of course points, but...

I am doing a nasty AOS895 (second one) but it may run one day, SOON. I am discovering that many AV1790 parts are similar and can be adapted. 895 parts are just about evaporated, though I will chat with Red River. The 895 is looking sharper after 30 MH and I have the special 'barring' tool...

WRONG The starter on a 895 is on the accessory gear, NOT the flywheel. There is an elaborate overrunning gear on the starter shaft. If it is not engaging it may be rusty requiring starter removal. Never strike the Jack&Heintz or Eclipse starter!!!! You must get the engine freed up before...

Help on 895 details The small box is the Booster. When starting you MUST turn on booster for one mag until it catches. It's a buzz box to give spark before mag has enough speed to put out. You can check for 'frozen' by opening timing access on upper rear of engine and getting a big screwdriver...

Fixing M-41 eng. need parts I need all shielded wire conduit tubes (good cond.) and the accessory drive gear cover (domed alum thing on center of accessory box) plus many things to be determined. Need end of Jan. 15.

We have AO and AOS 895 engines. They have the J&H 300A gens. That gen is the same as T-53 (Huey) and lots of aircraft gens. They use the huge carbon-pile regulator and later solid-state ones. These regs are common in aircraft boneyards and should be at scrap cost, functional. They are...

We have 2 of those engines (1-AO-895, 1-AOS-895) The natural one is on a trailer as a noise demo. It had been stored outside for years without carb covered and a lot of damage had occurred. I easily found a nice 1963 rebuilt carb (same as GAA/Sherman) and a pair of rebuilt mags. Mil plugs...