Search results

Are you able to load test the batteries?

I finally finished replacing all the hoses on my MEP-002A today. Here are some pictures of how I did the filter to injection pump ( which I forgot to add from my MEP-003A post) . I installed the oneway check valve on the secondary filter outlet. Then ran an almost straight hose to the injection...

In.

"The MEP 003a I have was refurbished by JimC and includes a replacement of the analog gauges with digital. I do hold the switch at start for at least 10 seconds. At no time do the gauges show anything." I have the same gauges and they also don't display until I flick the main ac breaker on.

We've been without power for about 1 day now. The 002 carried us yesterday and I just fired her up again this morning, gotta love that little unit.

I also use the lawn mower batteries in one of my 002's, I believe they are about 400 amps each, no issues.

I picked mine up from GL in Ft Meade about 4 years ago.

Good find, shipping on one set is 8.99 two sets is only 9.99. I've got two sets coming.

JimC, a member here makes these. I just put the full compliment on my 002. I've never heard any complaints/concerns about them. Ed

7/16-20 if I remember correctly.

Jimc on here did those decals, I put two sets on generators a few years ago with no issues. PM him and see if he still does them.

155mm, Thanks for the info, I'll take a look at this.

It seems after the first few times it cycles it will trip the alarm. After about three or four trips it seems to cycle correctly. I also set the fuel pressure as it was a bit low. I was thinking about ducting the warm air up and away from the return air but I haven't moved beyond the...

Post some pics and any id if available.

Man, that was fast. Looks great.

Tractor Supply has rain caps.

Mine was listed as an H82 on GL but it had the military connector on it so it must be an H83. Anyway I like the clean air it provides over the torpedo heater I used to use. The only issue is when it reaches the preset temp and defuels, I get a lot of "clicking" from the solenoid and most of...

How is the brightness compared to the stock bulbs?

If the plunger and contacts are pitted from arcing they can be cleaned by glass beading, wire brushing, sanding, etc. to get you going again.

1 part rustoleum rusty red primer and 3 parts rustoleum hunter satin green makes a real nice OD color.