Search results

It's been a long time but I'm back. Queiter, Better MPG Diesel. I’ve got a M1009 I’ve had for about 6 years now. Ever since I bought it the lifters have made this terrible metallic chatter especially when the motor was cold and even when it was at op temp but, not as bad when warm. Everyone...

This is on a 1984 M1009. Are these the stock M1009 brake drums? I can’t find any way to get to the adjuster screw assembly on these drums to back off the brake shoes. There is usually a slot cut into the back support plate or the drum itself for access. These don’t have either. I’ve done...

On my M1009 the Gen 2 light comes on momentarily when I take my foot off the accelerator. It then goes out when the motor goes to normal idle. When driving the volt gauge is just leaning into the red zone and goes into green when idle. I read a bunch of post but nothing like what I just...

Does anyone have a better way to bleed the fuel lines from the pump to the injectors then cranking on the motor? I've been cracking open the nuts on the injectors one at a time now for 3 days, on and off, and I can only see fuel coming out of 5 of the lines. The reason for bleeding the lines is...

The problem; 1984 M1009 motor will not crank over. I get dash lights & GP wait light, but nothing when I turn the key to start. The Gen-1 light goes out & the water temp light comes on when I turn the key to start. Other then that nothing happens. I checked the engine fuse in the fuse block...

I was drive at about 35 MPH in my M1009 when this loud scrapping noise that sounded like it was right underneath me started. It got faster and louder when I gave it a little gas so I shut it down and coasted to stop, looked around under hood and truck but saw nothing unusual. I started it up...

Hey guys, This is my first post to SS so be patient with me if I don't get it right the first time. I just bought my first CUCV, an 1984 M1009 My problem is, it makes this knocking noise that sounds like it directly behind the middle of the dash gauges. This happens upon start up and mostly...