Search results

Update- After resealing all the joints and plugs on the dual filter bracket and found a missing copper gasket on one of the banjo bolts/fillings at the cylinder head my fuel problem has now bee resolved. Fires right up after sitting for a week. Also moved my batteries from under the seat to the...

Followup, got the new stainless tubes from Ted installed, new push lock hoses installed, with JIC fittings, everything was working well. Added dual filter setup back and problem reappeared. Did not wan't to have to dissemble all those fittings but I did tonight. When purchased it was assembled...

Thanks for all the info and humor, just got home and went out and it fired right up from 5 gal bucket with a 10 ft section of hose,(normally it would have lost prime) and return line has been disconnected while sitting. It run great on the road after it primed, but today just cranked and shut...

Just pulled the return fitting out, and found a rotten rubber braided line running to the bottom of the tank, if it can suck air back from this line i'm sure this one was leaking. Wow

Would a pressure gauge be of any use in place of the transducer on the lift pump, thanks for the other info as well. If the FSOV is tied back is that the only engine shut off other than the emergency kill?

How do I contact you for purchase. Jeff 770-654-8689

ooh.... does the return side go down to the bottom of the tank like the suction?, not sure if i've ever removed it.

No I'm not talking about the FSOV , I mean the transducer located on the lift pump, like a pressure switch?

No on computer reboot does have fuel batteries OK tires OK Not sure if computer reboot is real or ?

Mounted lift pump back on, connected another new fuel line to 5 gal bucket of clean fuel. Primed thru lift pump, then connected to head connection, primed thru injector pump and injectors. engine cranked easily. Shutdown and restarted few times, allowed to run without problems. All other filters...

I've been not dealing with this issue for a few years! When primed fires up faster than a UFO, but let set overnight... maybe 24 hrs and it looses prime. removed tank, cleaned it with industrial steam cleaner, dried it out, removed pick up tube and it had hole at support few inches from bottom...

Did you ever get any response, I also recently acquired one and need a transmission filter other than a Case filter and cant find any info.

Additional pictures

Narrowed it down to 2.5 million

These were in a lot of rails i won, does anyone know what vehicle they go to?

Great video, thanks for posting. What type of grease did you use.

Awesome info, but what oil did you put in yours? Jeff

I've gotten everything disconnected but is there some special puller to remove the injector? Thanks for any replies.8) Jeff

Go to the site fanclutch.com, they made me one. Just give them the thread size and temp stamped on unit, for around 90$ It was really close fit in length, when you screw it in almost hit the back side of the radiator pipe

Does anyone know if there is a check valve between the fuel injector pump and the fuel tank. My truck is difficult to crank when cold , but once running it will crank right up, warm or cold.... no white smoke from exhaust when cranking. I use a little either and fires right up. almost like its...