Search results

Are there any instructions on removing the fuse box, or things to watch for when I do? I looked but haven't been able to find them anywhere. :sad: I think I have isolated the problem to the "fix" that was previously made when the "MAIN LIGHTS"/headlights fuse blew, and I'd like to pull the...

Well, now that you mention it, there are a couple outstanding details: its had a 12v conversion The left prong on the "Main lights" or headlight fuse previously melted at the fuse box. Someone at some point went in and "fixed" this issue by connecting the red wire (which I have read connects...

Yeah, thats my understanding as well, but thanks for the official instructions though. So, I flip the right toggle switch to "service lights on" like I've been doing for the past 3 months and all of a sudden I get nothing. Whats so confusing for me is the aforementioned multimeter readings at...

Right toggle switch pointed upward toward the "service lights" setting?

I checked that while replacing all the fuses

I've had her for about 3 months with no problems and then out of nowhere all the lights just stop working. No dash, brake, turn, horn, or head lights. She runs great and both batteries are reading 12.4v cold. I changed out all the fuses, but still have the problem. So I pulled out the...

I replaced the windshield wiper motor and everything runs great now.

OK, so I pulled the wiper arms and that isn't the problem. I pulled the wiper blades and used a bit of PB blaster on all of the wiper rod connection/swivel points. Without the wipers arms on, both of the wiper transmissions spin seemingly well with no problem, but once I put the wipers...

Ok, thanks for the tip, I'll check that out. I guess I figured that would only be an issue if I was trying to to turn the wipers off, and not driving down the road at 5am in the rain hoping to keep them on while looking for the right dirt road :razz:

Thank you, but I should have been more clear. The wipers stop halfway across the windshield while the wiper switch is still in the on position. I am able to pull the wiper blades past this "hump" and they will work again until they hit the same position.

Driving out to my duck lease yesterday my wipers stopped halfway across my windshield. Here are the details: The wipers always stops on the up swing at the same position if I pull the blades past the stopping point, the wipers will continue to move again and complete their full range of motion...