• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. ke6axc

    any good led work light options ?

    I found a set for the rear bumper that fit perfectly on eBay. I looked and couldn't find the seller just now. I have them wired as reverse lights. Work great. Sent from my LG-LS777 using Tapatalk
  2. ke6axc

    rear wheel leak...

    On my M1009 it was the brake cylinder. Is your master cylinder down on brake fluid? Sent from my LG-LS777 using Tapatalk
  3. ke6axc

    shackles for my m1008

    They are 7/8". Some of the Chinese made one are a little tight. Seen some on e-bay. Sent from my LG-LS777 using Tapatalk
  4. ke6axc

    Rear Axle Came Loose...

    Looks to me like the bearings failed. Looks like the inner races are still on the spindle. I've seen this once before, but the truck was overloaded. Sent from my LG-LS777 using Tapatalk
  5. ke6axc

    battery terminals melting??

    I got my military battery connectors on Amazon. I've seen them other places for about the same price. Sent from my LG-LS777 using Tapatalk
  6. ke6axc

    Steering Drag Link

    I used Moog when I did mine last year. Must of got old stock, it was made in USA Sent from my LG-LS777 using Tapatalk
  7. ke6axc

    desperately need help with m1009 wiring

    Hello, I would suggest downloading the wiring diagram. It will give you a starting point for troubleshooting. I've found a lot of bad wiring repairs in my M1009. Sent from my LG-LS777 using Tapatalk
  8. ke6axc

    M1009 brake light goes out when blinker is on

    When I had a problem like that it was the ground. Sent from my LG-LS777 using Tapatalk
  9. ke6axc

    Started a motor swap on a 85 M1008, need some electrical advice to get it started

    Yes. Done that also. I like the light because I can see it from driver seat when pulling fuses or finding bad wire under dash. Sent from my LG-LS777 using Tapatalk
  10. ke6axc

    Started a motor swap on a 85 M1008, need some electrical advice to get it started

    One way to find current draws is to take negative cable off and hook test light between post and cable. The bigger the current draw the brighter the lamp will light. Pull fuses one by one, wiggle wire, etc. looking for the light to dim or go out. Found several bad wires over the years this way...
  11. ke6axc

    New M1028 owner - questions?

    I found my stencils on E-bay. Other parts are harder as no one makes the correct color interior. Sent from my LG-LS777 using Tapatalk
  12. ke6axc

    6.2 CUCV water pump on a 6.5

    I would look up the gaskets and see of they're the same. Sent from my LG-LS777 using Tapatalk
  13. ke6axc

    1986 CUCV M1009 Decade after being wrecked.

    As a a Swsz as a Www www poop Sent from my LGLS775 using Tapatalk
  14. ke6axc

    M1009 roll cage & rock slider build

    Looks great. Are you tying it to the frame? Sent from my LGLS775 using Tapatalk
  15. ke6axc

    Using electric fuel pump with two filters

    What brand / model filter base is that. I need to do that to my rig. Sent from my LGLS775 using Tapatalk
  16. ke6axc

    Led dash bulb upgrade

    I did the 3 that light the speedometer and fuel gauge. It made a world of difference. Mine were so dim that I was guessing at the speed in the dark. Now no problem at all. Sent from my LGLS775 using Tapatalk
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks