Search results

Imjp8 I got IMJP8 set in place today and wanted to give thanks for all the help. Mainly Guy and Triple Jim. It was fun running the central air today. I am researching black diesel and bio diesel. I have a tarp for it also. New starter comes in next week. Jim your parts works flawlessly and are...

Ooops, got so excited I posted twice. :)

Wow what a great day, generator started and ran! Even lit up a light bulb plugged into the 120 volt outlet. Stuff I have to fix is generator runs if I hold S1 in start position, shuts off when I let go. Going to have new throttle cable made, replace bypassed CB2 and trouble shoot why I am only...

Yes I found CB1 and CB2, CB2 what was left of it, jumped it and now I have panel lights, pre heat and etc. Working on fuel tank now. It is cranking from master switch now. Hey I just had to whine a bit, get some sleep and I am back at it again. More later, but thanks for the post I come back and...

I don't think I have a fu1 the AC breaker is CB1, the DC breaker is CB2

Got my electrical wires put back together and nothing, no lights, no clicks, na da when I turn master switch. Same as before I started electrical wire repairs. If I short starter motor it cranks motor but I still don't have fuel tank on due to painting it and summer house repairs. Is FU1...

OK I have an answer. Wire is P55B10 Wire comes from P1-C going to B1-K6. Picture shows P1 connector I took apart and found wires C and D cut. I still need to find out what K6 means, but I am working on that. So how did I do Coach?

This is where my power comes from at 2am. I am busy working on your / my homework problem now. I did not want the answer I wanted it just like you wrote. I won't learn anything if you give me the answer. I just needed some help. I am looking at -34 now which is much more clear. I will put it...

OK if I am holding P3 in my hand you have figured out one for me. Some of my connectors still have the P tags on them, some don't. P2-R will go to this P3-B with a new wire. Going to use 10 gauge white. Should be 12 but I all have is some new stranded 10 gauge oil resistant wire.

Plug. OK so if P2-R goes to P3-B I am still in left field. Meaning it does not go to that negative post on the starter where I have attached the red wire. Because it would not be another connector but a terminal or possibly B1 for starter? Now let me look at TM for meaning of TB. I will see if...

Bought MEP-003a from Fort Riley GL 2607 hours. Has about 5 cut wires. Let's start with just one on the starter negative post. I put a red wire on it now to show location. Next picture shows a connector with a cut wire. Is this P1 Plug? Pin that ohms to outside cut is R. I have the TM's for the...

Copy that I will get a new thread going. I put the red wire on there just to show location since the old wire was completely missing. Thanks

Hey thanks, that truck looks awesome also. Get me a pic of it on the little Sahara!!!

Greeting Illinois, thanks for saying hey!! Nice truck.

Guyfang thanks for the greetings I downloaded the TM's for the 003 which I believe you posted. Also noticed I have been moved into the correct forum so thanks for whoever did that. In the picture that shows the red wire on the negative post of the starter is marking one of the wires that was cut...

Lonnie impressive list of equipment you have done well.

Hey I need a truck like that to haul firewood!

Hello from Spring Hill KS bought a MEP-003a from Fort Riley and it has about 5 cut wires. Trying to figure out where they go using the four TM I downloaded from here. Will post again if I cannot figure out which TM to find pinouts on the connectors. Thanks Tracy 2607 hours on the 003