Search results

Well good deal, mine does not have the winch either so maybe I can use a regular one?

Yes thank you for the info, Mine has the Duramax fan kit on it so it no longer has the Cadillac valve. I has a regular clutch fan. So I may be able to use the non military one.

My power steering pump on my m1165a is going out, I am looking at options. I was wondering why some on eBay are $300 but Hummer parts guy is $750 is there a difference?

Good Luck everyone!! Have a Blessed Thanksgiving weekend.

It depends on the Load Range, Im pretty sure mine say max pressure 65 psi. but either way I don't run any type of bead lockers.

I removed all of mine, but I don't air down my tires. I run 55 psi

Looking for the all around best coolant for a 6.5 Turbo in a M1165a. I don't want to have to add additives all the time or have scale build up. What are your thoughts.

So To make a long story short, my M1165a brake lights stopped working while driving in town. My brakes are very touchy and barely have to be applied to stop.. so not much travel in the brake pedal. So if you reach down and push on the switch you have brake lights. I followed the instructions on...

Well I have not, It was coming on with the old box most of the time.. It does one flicker with the new box now. I am going to change the glow plugs and make sure the new sensor is good, I am going to change to the old sensor just to see what happens.

So my old nartron box was acting up, had to have a small tap to get it to charge and for the fans to come on. I bought a new box and sensor from black dog. I installed it with new bolts, new battery terminals, batteries at 12.8 bolts each. Cleaned all connections starts like a champ. Now it has...

Ok so Iooked it up on that TM and its part number 6015619

Well no I have not been searching the TMs, I have been searching all the sites I can find to see who sells it so I can get it hooked up.

I am missing a piece of duct that connects the top cross over bar that has all the vents in it, to the hose that goes across the motor to the drivers foot area vent. It has the vent and the hose but it is not connected to the crossover bar. It has a square hole on the bottom of the bar and a...

So I went out tried it again, I turned switch to run, hit the fan on high it delayed heard a click then the fans came on went off came back on and stayed on. I started it and it came up to green in a few seconds. wait light was on for a bit then went out but came back on went out again and...

Well Which replacement EESS box would be the best to replace it with?

Ok so If it does it again, check that sense wire witch I thin is the red one, and if it has no voltage that means the EESS box is not sending. So possibly knocking on the box will shock the relay and it may get the voltage.. I can check that no problem, It seems strange to me that that same...

I have the NARTRON smart start MFR-32498. The same one that Black Dog Customs sell.. I think is a new style

Which one is the IGN terminal? Are you saying the EESS box is failing or a relay is failing?