Search results

Thanks!

Any updates on the hmmwv Supercharger?

I'm inspired, Great job! Will that turbo bolt to the pre exhisting plumbing?

1= 24v 2= 24v 3= 0 in the on position 4= 0.9

No, I am getting 24v at pin 3 and 4. 290A 281 537 is one plug on the relay and the other is 290 291 537 with no alpha code, and no volts from them.

I am getting continuity from the relay, however when I check the volts from 290A to 290 the perspective plugs I get o.ov?

I have 24v at 3 and 4. I will have to get a new relay. Thank you for your help, I really appreciate ya!

Sorry for the miss information, I do Not have readings at 3, 810A 0r d and a at tcm

It reads 11.88

Neither one of the lights bt gear shift come on.

Is the wire 290/291/537 A connection at the + terminal ?

Thank you

Action There is no power to the transmission. At the tcm, the main wire harness do you know what wire code is the power?

Thanks for your help, I will keep ya posted.

My transmission and transfer case lights do not work, the dash lights do. I connected a wire at a and e on the tcm and a dummy light and had no response at the light or at the a and e ports.

I can't get the transmission light or transfer light to work. My other dash lights work. I put the wire ina and e on the transmission box and nothing happens. Thank you for your help!

Thank you

Transmission 4l80e still in limp mode... So, I finally had time to work on the m1123 again. I tried to reset the relay and that did not seem to reset/ no change. So I changed the dual switch at the brake pedal, not sure how to adjust it, so I tried it at one end of the adjustment and at the...

Thank you for the help!

The lights by the gear shifts are not working, I tried checking for codes.