Search results

Two sets? One set comes with four already.

I’m currently looking to figure out how to fabricate my own fitting in the 3/4 inch bung using metal instead of pvc. Once I overcome that obstacle of getting a pipe to connect to the bottom side of a bushing I’m going to get a 2 inch vented filler cap from tractor supply.

Yes I looked for 3x3x1 inch anti vibration pads off of Amazon and it made a world of a difference with vibration on the ground. Before the anti vibration pads when I mounted the generator on the concrete pad it amplifies the vibration through the ground so badly that I could feel the ground...

Just wanted to show my 2006 mep-803 set up with a 60 amp interlock kit. Have a sub panel box as well for load testing. Also purchased a 55 gallon drum for a auxiliary fuel tank

Every time the generator starts it always starts with the pressure being around 50 and after running for a while is when I notice the oil pressure dropping to the low 20’s. I also flushed the rediator because the radiator cap was missing the second rubber gasket So the coolant wouldn’t go into...

thank you I will look into finding a oil pressure gauge. should I not trust go off of the main gauge on the control panel?

thank you I will look into finding a oil pressure gauge. should I not trust go off of the main gauge on the control panel?

Just purchased a 2006 Mep-803a with 2500 hours on the unit. I changed the oil right when I picked up the getset and changed the filter as well with rottela t5 synthetic blend 15w-40 and a wix filter 51374. When the unit is cold I get a great 50 psi and as soon as the unit warms up to temp it...