Search results

I have a half assed version of what you did and I drilled holes. It works.....I guess. My wife traced the deck mat on a piece of cardboard and we cut the wood. We cut the back so it fit perfectly under the sub....nice and tight and the front under a custom speaker/cup holder that sits attached...

I also decked the middle section from the doghouse to about 4 feet from the back where we have our sub-woofer box. We outlined the whole section and then made a cut out with wood. I dymatted the bottom and dyna decked the top. It made a huge difference. We did the same with the roof. 5 by 5...

I have 4 X doors that I don't use. I installed tube doors. If I can help you out let me know

I'm sure they appreciated the support. Who's seats do u have in there?

I ordered two new Odessey batteries. Not the $700 ones because they won't fit. I've got far too much stuff wired under the seats. We'll see if that works. I appreciate the advice. I had my audio guy go through the entire system when it was getting updated, and he didn't find anything. This is...

You can also try Mungle Brothers in Dripping Springs, TX. He does everything from gas conversions to full rebuilds. Last time I was at his shop he had installed a margarita blender on the doghouse for a truck headed to a hunting ranch. Everything they do is gorgeous. He also has a couple for...

She should be finally finished....maybe new seats in the spring. She's no longer a mil-dog.

Eaton Cooper Bussmann Sure Power 21100C00 Converter, The stereo package is a monster. I’m adding a 3rd battery for additional stuff that’s being added but I need to get this straightened out.

that must be where I’m having an issue. It’s not at 28. It running maybe 25/13.

It wasn’t a cheap one. I went that route prior and it lasted a couple of days before I got a good answer here and bought the alt I have.

Eaton Cooper Bussmann Sure Power 21100C00 Converter,

160 AMP 24 Volt - HMMWV - Alternator Upgrade Kit. From “those military guys”.com https://thosemilitaryguys.com/products/160-amp-24-volt-hmmwv-alternator-upgrade-kit

Yeah that's my plaan as soon as I get her back, if they don't find anything else.

I did the inverter last year. I've had no issues until the last few weeks. I was wondering if the voltage regulator goes all at once or dies slowly. My audio guys are going through everything again anyway but if I need a new regulator I wanted to get ahead of it. Even if they find an issue I...

Today we start a 4 speaker JL audio package on the tire rack along with light package in the grill, scope and tire wells. I'm running it with a 3rd battery. There is nothing left to do but replace the seats next spring on this thing.

Gents, I have a ton of peripherals attached to my 89' M998. I installed a 160 AMP 24 Volt alt two years ago. I switched out the batteries for two new Optima's. No issues. I have a ton of add on's. Speakers, lights, Speed Hut instrument panel etc. This year I'm losing the radio power after a...

As soon as I get home.

I absolutely will. We bought the wood from McCoy's as they were the only ones who had the right size pre cut. This was for a M998. We matted both sides with dyna matte...two packs should cover both sides. I doubled up on the front as I wanted to provide as much support for my overhead...

If you can insert a piece of wood and then carpet it, it will help immensely. Mine was tight before the install and it drove me nuts as well. With the "new" roof and the sound deadening stuff, it helps a ton. A 5 by 5 sheet covers 95% of the roof and allows you to get the cover back on. I...