Search results

I guess "if you want to dance you have to pay the fiddler." ....so I picked up a used working box by SSI. Problem solved. I tried to find a way to save. Thank you you all. the box is the culprit.

My only issue is the wire 81a does not have good volage (1.3V only) to POS lug on starter to charge my battery. but I don't want to replace the SSI EESS box, which maybe bad--as far as giving correct voltage to wire 81A to charge the battery. So I might just as well run a wire straight from...

I traced all paths, all working, I think the EESS box is bad as far as not putting out good voltage. Otherwise, it still works good and starts my truck. I don't want to fork out $500 changing it while it is still spanking new. That is why I ask you all for your opinion on my idea of a jumper...

I have inspected all connector and box, all seems to be Ok with no burnt marks. But this what I have found: Sticking the test probe into the 81A wire at the cannon plug, I have either correct 27.3V or 1.6V. One time it is correct another time it is not. There is not telling of when or why the...

Yes, I have 28.5V at gen with pos disconnected at batt while engine is running. It is confirmed that my Gen works, which can powers all light, heater when batt is disconnected. but that 81A wire in the picture carries very low voltage average 14V, sometimes 3 4 or 23v max. thanks

Yes, I have 28.5 at Gen coming from the gen (engine running and Pos terminal of battery disconnected) that is between red cable point A below and a good ground, Please allow to make sure that I understand you: As the picture be low, the smaller wire coming from the top of the picture is wire...

Please note I have Prescolite 60AMP gen. I adjusted the voltage screw and opened up the cover. I got voltage set at 28.5V--within recommended range. Point A, below: However, at point B, below, the voltage is so crazy, it changes all the time from 3v to 14, to 21 up 24V! Most of the time it...

further testing and investigation Here is is a better picture of the cable going into the starter. Again, with my observation: this is the only cable from somewhere else that can charge the battery if that is the case, one with my finger on it: I will open up the alternator and test the...

hello all, please help. I am trying to fix my friend's HUMVEE in exchange for drive time and to learn how to fix humvee's(...while I am still saving money for my own.) The battery is not being charged when engine is running. The generator appears to be working: when the engine is running, I...