Search results

Hi, After the last time you ran it, did you top it off with Fuel? For some reason these things don't like to run on a over filled tank. Just to check. You have the dead crank switch in the run position. Yes? You have the Circuit breaker push all the way in. Rite? The fuse is good. Rite? The...

Thanks for the concern guys. Yes I put the Diodes in correctly and looked over everything. Cleaned the Fuel tank & filled it half way. All new filters, Oil, Air Fuel. Cracked the injectors and after letting it prime to fill everything, I tightened the injectors and cranked it over. Took two...

So, Heads up guys, when you are going to bid on a Gen. set of the 802A or 803A, look behind the control panel and to the left to make sure the DIODES are not missing. I just want to pass this experience on to you all. I sure have learned by it. Good luck To All.. Thanks Raymond

Here in Hawaii we have only the Gov. Liq. (DERMO) This is where I got it. http://www.govliquidation.com/

Ok you Guys..... That's all it was, the CR! & the CR2 Diode. Put all the fluids in and she started rite up. Has power and everything seams to be working. I post a Video on YouTube and post a link to the Video here. I hope all your guys fixes go as simple as this did for me. Thanks Again...

Correction CR1 & CR2 not CB,,,,

Ok, what I found, I am missing two Diodes on the Bridge Rectifier Assembly ( CB1 & CB2 ) Now I need to find the Value of the two Diodes and install them, That should put power to everything that's not getting it now. I'll try to post a couple of pictures, one With the Diodes that's on my 802A...

I'm going to look at it again today. That will be my first check I will do. I will post my findings Thanks for the input. Raymond

Thanks Mike. Although I don't log on all the time, I am always returning to this site for many of my needs. Thanks again. Raymond

Hi everyone. I just got a MEP-803A everything looks to be all there and connected properly. Problem is it won't crank. I Have had a MEP-802A for some time now and know about the Kill switch, DC control power circuit breaker Button behind the Panel and the Fuse. I did a little testing with the...