Search results

Mother @#^%&& Anyone want to buy a Duce???

Ok, I was able to pull off the inspection cover of the bell housing. The throw out bearing moves fine. what I did notice is that the fingers on the pressure plate, one of the four is riding againt the bearing. The other three, I move them up and down with a screw driver freely. To get to the...

Zout, is there a simple inspection plate to get to that grease fitting and where would i find it? Thanks!

Thanks everyone! Hopefully the bearing doesn't need grease. I just serviced about 2 months ago. If these storms will let up here in NC, maybe I can get under the truck tonight... By the way, when you speak of pilot bearing, are you referring to the bearing that rides back and forth on the shaft...

Well, sound like an ajustment then...sitting the driveway with the clutch in, I cannot shift to any gear while I have the clutch to the floor. It on will go into if the transfer case is in neutral. The clutch does feel strong...I dont think I have alot of travel in the pedal.. And thanks again...

Yes, If I shift the transfer case in to neutral, then I can shift into gear and then I shift the transfer case into high, a slight grind noise, The truck drive fine in what ever gear I put it in. I dont know if if will shift into different gears while driving since I don't want to left on the...

My Duce won't go into gear??? It was fine two days ago and nowi it wont go into gear. If I shift the transfer case into neutral, it will shift into gear with no problem. also it will go into gear if the transfer case is in low...any idea's? by the way, I did put a new tranny in about 500 miles...