• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. DriverSideImpact1008

    I'm Back!! With a new M1009

    Did some searching and the leaf springs are from Superlift. The specifics of these I couldn't tell you. I would assume it's a 3-4" lift. I also took the 1009 for a drive today. The tires are really "lumpy" feeling. There's a little leak, I think from the front of the T-case (the P.O. rebuilt...
  2. DriverSideImpact1008

    I'm Back!! With a new M1009

    Thank you all. The Humvee tires do look really cool on there. 8) These are the older Goodyear 36" bias ply Humvee tires. I'd imagine radials would ride a lot nicer on there. I'm not sure about the lift. The military put the tires on it. I'd imagine there is a lift of some kind. The springs look...
  3. DriverSideImpact1008

    I'm Back!! With a new M1009

    It rides like cold sacks of potatoes ;-) Nah it's not that terrible for a short wheelbase 3/4 tone truck. And the tires are cold and have sat for a while, so I'm sure they've squared out a little bit.
  4. DriverSideImpact1008

    I'm Back!! With a new M1009

    Got all the plugs out finally!!! I bought the OTC glow plug remover tool two weeks ago. What a huge P.O.S. aua **** thing broke at the hinge on the first plug... following directions and everything... I was still able to use it to get 3 of the 7 plugs out, but it took around 45 minutes to get...
  5. DriverSideImpact1008

    I'm Back!! With a new M1009

    Thank you islandguy. You have a great looking 1008 yourself. I am impatient and wish that glow plug remover were here right now, so I could work on the beast. However, I'll be pretty busy the next 4 days so that will make the time go by quickly, and in my spare time I plan on doing the Doghead...
  6. DriverSideImpact1008

    I'm Back!! With a new M1009

    ^^ Yeah, that was the JJ&R tool that they are sold out of The tips aren't magnetic. How big is the passage from the pre-comb. chamber to the cylinder? Big enough for the tip to go through? The other 7 GP's are shot (bad on the Ohm test). I definitely plan on bypassing the resistor though...
  7. DriverSideImpact1008

    I'm Back!! With a new M1009

    So I found the OTC glow plug remover on fleabay for less than half the price of most on amazon. That should be here by next week Wed.-Fri. However, in case the tip does break off while using the GP remover, I heard having the piston at TDC will not let the piece(s) fall down into the cylinder...
  8. DriverSideImpact1008

    I'm Back!! With a new M1009

    I sold my M1008 a few years ago due to its impracticality as a daily driver/highway cruiser...but I have come down with the OD Disease again...I found a great deal on a 1985 Blazer M1009. It's got 26k mi. on it. It was owned by a guy who used to buy and fix up a lot of CUCV's and other OD...
Top