Search results

Thanks. Now to see when Stan gets home from work or out of his shop. Jerry :beer::beer:

Stan, Have never tried to link to another post on SS, but here goes: http://www.steelsoldiers.com/showthread.php?98817-Mep-002a-Auxiliary-Pump-Lift&p=1264825&highlight=#post1264825 Hope it works. Merry Christmas to you and yours. Jerry

No grounding. All components of the shed have positive contact between them. Jerry

Greg, Casters are a must whatever your storage/housing arrangement. You need to be able to access the entire unit regardless of light conditions. Jerry

Greg, You got it right. One step at a time. Jerry

Cool to build. Besides, I needed another shed. Might as well use materials already on hand and get some additional benefits from it. I'm not quaking in my Army boots but am prepared. Jerry

Perhaps Patracy. But both units have physical disconnects at the house panel and in the shed. There is a house power quad outlet box and 2 fluorescent fixtures in there on house power but I think, at the worst, they would just be burned up rather than affect the generators since they are not...

No the sets do not run at the same time. One is back-up to the other. The one on the left is isolated by a removable spade witch. If I were to run it, the right hand one would be physically disconnected by removing the 50 amp plug from it's receptacle. It would be nice to have an isolator...

Tubing is 2" from Advance about $28 for each 5' length. 1 3/4" would have been better but I split the ends at the mep elbow and used SS hose clamps and aluminum tape to seal the exhaust. I I nee to bring one out of the shed, just pull the tubing through wall. Napa also carries it in 10'...

BTW: will be eventually some pattern of brown to blend a bit better from the water view, as will the tanks. Jerry

Some pics of the Faraday cage I'm working on. MKT roof from GL, structural aluminum frame. 5v galvanized siding. Alum foil covered 1 1/2 " Celotex insulation (foil both sides) was used for walls and ceiling both for emp and sound deadening. Materials, except for 5v were left from my...