Search results

Watch out with this Phillips head screw , holding the clamp ring together. I used freezeoff and worked the screw back and forth until it was easy to turn. Luckily I didn’t break it. then get a large bottle of CLP and wet down the felt strip. I pulled it out just enough to wet it and moved to...

In the post by m715mike, you can see a bit how the ring turret is constructed. I unscrewed the top plate with those Phillips head machine screws and removed the ring , that holds the felt strip in place . I sprayed plenty of CLP into the gap on top and screwed the top plate back down, soaked the...

I used two straps and connected one side to the handle bars and the other to the ring turret , then I pulled the straps in an alternate fashion . Working the CLP I have sprayed on the felt into the bearings. I ordered More Clp and will do that same thing after letting it soak again

Did you post a thread about rebuilding yours?

@goodwithwood35 mine is mounted on the truck

Anyone here know how I can alleviate the sticking m66 situation ? I read that the felt part wants to be greased with CLP but what else do I need to do to PMCS these?