Search results

I tack welded some bar stock to the main part,then clamped the rear section on.Tacked it all together then welded solid. After all that I knocked off the bar stock and ground all the welds and painted :D

I would like to find some 395s to run, anyone in New England have any? :D

more pics of work,thanks for all the comments :D

To make it simple i measured from the back of the actual frame 3' and cut as that part was on the ground i torched the rivits and did a lot of pounding,I then took the pintle cross brace and slid it back in and drilled the holes and grade8 bolted it all back together.The bed I cut 10" off first...

what muffler is that and how does it sound,nice truck :D

The crane is a hurting unit the only thing that works is the crane itself. bad wiring, bad brakes, transmission is beat, bad compressor,tires all bad,rusted out cab , front diff needed work . The list goes on. My plans are either swap over to an multifuel truck,or build a trailer out of it or to...

Started last weekend on the bob job. I used deuce front springs hangers shocks with new u-bolts, moved the axle back 10 inches and had the driveshaft lengthened. Sawsall went to work and I cut 3 feet out of everything then welded it all back together. I just finished it today I have around 24...