Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I had my truck go through commercial inspection yesterday and it passed with no problems found at all . Going to insure it today so I went through a scale and have gone over all the local vehicle regulations . My truck full of fuel with the spare on the back weighs 26500lbs , gvw with running...
I mounted my modified original crane and spare tire today. One pin and the crane can be removed with the spare because it's not needed unless I am working in a remote location. The lift gate has been engineered to lift even with the extra weight of the crane and tire.
There was only room for a 15 GPM pump which is plenty for my hoist ,It turns out they did have to loosen the tranny bolts and move the trans a little bit to get the PTO in .
I ordered a Chelsea parker 221R part# 221REAJP-A3XK which gave me a 15/28 gear ratio (the middle of the three available ratios) air shift and a sae B 2 or 4 bolt 13 tooth direct pump mount (no driveshaft required) will have to check on the pump the installers are going to use and the expected...
Here are pics of the PTO, It went on no problem ,is air shift and direct pump mount (pump not on yet) and no problem with heat from the exhaust.
Everyone that has had problems installing there pto may have been using the wrong pto,I have seen two kinds of housings for sale and in my opinion some...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!