Search results

Rack was sticky. Free now. Solenoid was on the cover separated ad free to move.

I checked the solenoid yesterday. No click, so I opened up the top and tested it direct and nothing. The other solenoid in the cover works, but no the one that cut off the fuel. Got one on order. The arm assembly in that cover area was a bit sluggish when you manually worked it. I sucked out the...

Finally had a chance to tackle it head on today. Bled the filter again just to be sure and pulled just one injector line loose. Put a small cup under it and making sure the electric pump was on and running, proceeded to do the crank 30 seconds, rest five minutes routine. Six times, nothing out...

I tested the pink wire to make sure, power at the tab on the IP (injector pump). Fuel up the the IP, no problem. I will try just cracking one or two lines rather than all of them and give that a shot. Glows work well, on a manual solenoid/switch wired to the "wait to start light", card burned...

So, due to a new job and all I haven't run my cucv for quite a while, almost 8 months or so . Needless to say, it wouldn't start. I assumed it lost prime and after making sure I had the filter full, I opened all of the injector lines and cranked it. Did it a bunch of times, allowing for cooling...