Search results

Pulled the pump off and the spline shaft was broke. It seems to be a cross series 53 pump. Any info. On parts or a replacement pump would be greatly appreciated. Many thanks.

The #2 lever controls the speed and in the up(detent) position supply to the aux hydraulics. However with the pump running i am only getting fluid out of the line towards the front. Should i get fluid from both (front and rear)? Or could the pump be broke and only the front line is working?

There are 2 lines going in to the pump and 2 lines out. I would think that this would be a 2 stage pump(both lines out would be under pressure) 1 would be able to run the winch and one would be able to run the dump. Unless ONLY one discharge is a pressure line. Then what would the other be?

The winch control system that was on the back of the truck had 2 control valves. I used the one with the detent for the dump body, down position raises the box and up position lowers the bed, if you put it in the detent position the bed will go down by its self. I took the other control and...

I have a m920 that i removed the winch from, mounted it on the front, and installed a dump body and hoist on the back. Now, i have run the hydraulic lines from the pump to the winch and hoist. The front line is run to the hoist, which works. The rear supply line is run to the winch, which does...