• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Leak: Thoughts before degreasing and diagnose

    Is the first image of the current throttle setting? If so it appears you have the throttle pushed all the way in. Might want to pull the throttle out a bit more and retry. You have smoke, so that means you're getting fuel, but I'm not sure I like the way it's cranking. It sounds a little slow...
  2. R

    Leak: Thoughts before degreasing and diagnose

    Looks great! As an FYI, the Stove Brite paint needs to be heat cured by running the engine at temperature. It will not be very resistant to fuel spills or other chemicals until it is cured. The details are listed on their data sheet , but I learned it the hard way... so just be careful until you...
  3. R

    Leak: Thoughts before degreasing and diagnose

    To get the crimp ends off just slit it down the side with a Dremel and cut-off wheel. Replace the line with 1/4" fuel / transmission cooler line and either use squeeze type clamps or regular hose clamps.
108,573members
163,825threads
2,304,882posts
957online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks