Search results

My manifolds are like this, the gaskets were on the original engine and I put them back on. Inviato dal mio CPH2005 utilizzando Tapatalk

New gaskets on both manifolds and coupling flanges. 6.5 n.a. Inviato dal mio CPH2005 utilizzando Tapatalk

Since I fitted this engine I have done about 800 km, at about 100 km/h, a couple of times I pulled a little more after the noise to see if it changed Inviato dal mio CPH2005 utilizzando Tapatalk

I'll try but the Allen bolts are all tightened, as are the flange bolts, the only thing missing is to check the passenger side because the bulkhead is annoying. I'll try dismantling the starter motor and check there too. Traduci dove e quando vuoi Inviato dal mio CPH2005 utilizzando Tapatalk

OK understood, but I already checked the alternator bracket on the exhaust bolt. Thanks anyway for the tip Inviato dal mio CPH2005 utilizzando Tapatalk

I'm sorry, but I didn't quite understand which part it is Inviato dal mio CPH2005 utilizzando Tapatalk

Oil and filter replaced after 500km and tappet additive added. Sometimes it seems to tick between the engine and gearbox, sometimes on the passenger side. It still works but is really annoying. If it idles for an hour there is no ticking, as soon as you go a few metres it starts again, one...

Hi guys! Here I am again, not even a thousand kilometres after the new GEP engine, new problem. A ticking noise that occurs from time to time, especially as soon as I stop after a lap, then after a minute at idle it disappears. The engine runs very well, pulls hard, doesn't smoke and always...