Search results

planning on using it off the grid on my ranch/hunting club power office trailer (100 amp A/C) and 3 travel trailers when there

wish I would of seen this yesterday Thanks

Problem was the tee on top of the IP i've cleaned it several time (4x) (cause of other post on this site) looks like I will be needing an impeller soon cause the stuff that keep clogging the the ball look like coffee grinds. flushed the IP pump to get as much of the micro black particles out...

what solenoid should I be looking for and where?

no go still wont last over 15 seconds

yes i do to but just to flash to get the gauges and get the oil pressure up I'll try the 15 seconds it got to be something easy its been running

pulled both pumps un did clips pulled out bead spring and shaft looks like one pump wasn't working cleaned both put them back together and put them in. big difference in the noise they make now. still get a 4 min fill on a gallon Day tank full of fuel I also cleaned the tee on top of the IP...

Yes i did pull the tee and cleaned and checked that bead/ball was there I missed this part of a thread from sewerzuk "You can check several of these things by turning the start switch to run, disconnecting the fuel line to the IP, and let it flow about 1 gallon into some kind of a catch can. It...

was running and now it won't stay running more than 20 seconds after suggestion from sewerzuk (see quote) I have changed fuel filters and cleaned all fuel lines, clean fuel pump filters, checked all 90's, steam cleaned day tank, checked injector return line, made sure all fitting tight at...