• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. antennaclimber

    M1010 Convoy Truck

    Looks like that wire was a repair job. I will have 2 AC units, one for the cab and one for the box.
  2. antennaclimber

    M1010 Convoy Truck

    I thought about 24 VDC but it's simpler to keep it all 12 VDC. The original M1010 alternators were replaced by the previous owner to the standard CUCV configuration. Once I get the engine back from the machine shop, I will start the process of getting the alternator and AC compressor mounted to...
  3. antennaclimber

    M1010 Convoy Truck

    I thought about putting the generator where the original AC unit was. But getting to it for refueling and maintenance would be an issue. Decided to enlarge the original heater access door and install HD drawer slides so it can be slid out or removed to use it. The compartment will be vented and...
  4. antennaclimber

    M1010 Convoy Truck

    Getting the passenger side out was very difficult. Much harder than the driver side. I decided that it was not going back in....Eventually with a sawzall, cutting wheels, battery recharging, BFH, hydraulic jack, pry bar and a few four letter words, I got it removed! Every time I thought I had...
  5. antennaclimber

    M1010 Convoy Truck

    The heat and A/C for the back will be a roof mounted RV type unit. The back of the vehicle was gutted to make room for a new interior with beds, sink, shower etc. Things might be a bit tight, but we will make it work. I have a 12VDC to 120 VAC inverter to run it while we are traveling. At night...
  6. antennaclimber

    M1010 Convoy Truck

    There has been some progress with the build. I will get some pictures posted later along with details of the factory insulation. The factory insulation was just placed between the inner and outer aluminum. It is very easy to remove once you drill out 1,456,231.5 rivets holding all of the inner...
  7. antennaclimber

    M1010 Convoy Truck

    Finally was able to remove the box off the back. Now to start on the frame work as time permits.
  8. antennaclimber

    M1010 Convoy Truck

    Some minor progress. Painted underside of the cab and cleaned up some other little items. Took the transfer case shifter lever assembly completely apart, painted, lubed and reassembled it. Painted a few other smaller do-dads as well. Have the Lizard Skin ceramic paint coming. So that will go...
  9. antennaclimber

    M1010 Convoy Truck

    Yes sir it is. Hopefully you will be able to see it on the next Convoy.
  10. antennaclimber

    M1010 Convoy Truck

    Little more progress this week. Vent windows were removed, installed new rubber seals and painted the metal frames. Removed window glass, painted the channels and cleaned out all of the old sticky white lithium grease. Removed the seats and painted the hood hinges. Cleaned out the interior of...
  11. antennaclimber

    M1010 Convoy Truck

    A little more progress. Hopefully we can devote some more time getting this project completed.
  12. antennaclimber

    M1010 Convoy Truck

    Finally had time to remove all of the interior metal from the ambulance compartment. Must of drilled out at least 100 rivets so far. Still have a long way to go!
  13. antennaclimber

    M1010 Convoy Truck

    Engine has been removed.
  14. antennaclimber

    M1010 Convoy Truck

    The truck will get converted to 12VDC, so I may run larger wires to the rear of the vehicle.
  15. antennaclimber

    M1010 Convoy Truck

    Sure!!! Bring it up and we can have it off in a day...
  16. antennaclimber

    M1010 Convoy Truck

    Yes, finally a shop that I can call my own!!
  17. antennaclimber

    M1010 Convoy Truck

    Finally, started the tear down of my M1010. I bought this truck years ago for use on the MVPA Convoys. Well, 8 years later, I am finally getting the chance to do that. Hopefully, I will have it completed by the next Convoy in October 2024. Plans are to refurbish the entire vehicle, delete...
Top