• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Recent developments with the 1009.

    Thanks guys when it happened I was in a ghetto neighborhood and alone, I just wanted out of there. I never connected all the symptoms together.I did check batteries and volts to gp solenoid ,was 13.1. I keep a multimeter in truck.When I saw I had good batterieries,good charging from both alts...
  2. R

    Recent developments with the 1009.

    Yes nice and easy,I was gonna pull every fuse til I found a bad one ,found it on first try. So if your fuel gauge drops to below zero,and you don't have 12v to small wire on GP solenoid and cold start solenoid when key is on and no wait light check #17 fuse.Now to figure out why the fuse blew.
  3. R

    Recent developments with the 1009.

    Well I over complicated this problem! This am replaced #17 20 amp fuse.Now all works again.fuel gauge,GP solenoid, cold start solenoid and wait light
  4. R

    Recent developments with the 1009.

    Thanks Rick, my sensor is on drivers side.rear of head.I will be doing some testing tomorrow,
  5. R

    Recent developments with the 1009.

    Everything worked well at morning starting, then when I went to start after work No GP light, no GP activation with manual push button no fuel gauge and no cold start advance activation, when I got it to start it was at low idle and injector timing not advanced. Any ideas? I'm working 2 hrs...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks