Search results

I must give young gun credit for the idea. I made some changes but the idea was his.

Yes I used the convoy light br ackets. And 3/8 by 2 inch u bolts I spred the u bolts a extra 1/4 inch to go in to the holes the holes had plugs that I pushed out with a screwdriver. The brackets are 50 inches apart center to center.

I decided on building a light bar to mount the lights over the cab. I started with 2 5 foot pieces of 1 1/2 inch sch 40 pipe and 6 and 1/2 feet of2 by 4 5/16 tubing. I used a broach drill to drill two 1 7/8 holes 50 inches apart. The 1 1/2 pipe fits in the holes and the weight of the tube rest...

I went with the bumber mount. I plan to draw power from the brights and switch the ground. I plan to fab a guard using a 8 inch u bolt and puting a 90 deg bend at the threds and drilling two holes in the bumper to mount. Maybe weld a round piece of expanded steel or some type ofsteel mesh at...

I agree they just don't look right on top of the winch mounted on the 3/8 rectangular tube being used as a winch top plate. mounting them on either side of the winch will look better. Thanks for the thoughts on the subject!

I've been thinking of mounting a pair of route clearance lights above the winch. I have not drilled the holes yet to mount the lights. Any thoughts on how they look above the winch:?: