Search results

Yes I removed the clips from the back of the fuel gauge and sanded everything to bare metal and the post on the back of the fuel gauge. Then I removed the ground from the frame and sanded it all down to shinny bare metal. It appears to be working now, just need to add some gas to see for sure.

So here is what they did to the wiring. The red wire that was cut was wrapped around the orange wire in the right corner that is partially stripped. It looks like the red wire where it was originally located the other half is bridged to the solid orange above it. What is the best way to...

Well Ive found more out. I removed dash and cleaned every terminal and bulb and bent pins out, I had to solder one of the copper connections for GEN2 light. A little continuity testing helped me find the break. Looks like gen lights are fine now. The left blinker light still comes on when I turn...

I have cleaned all the grounds by the radiator, the grounds on the frame by the radiator, the grounds from the engine to the bus bars, all the connections on the bus bars as well. I have not looked into the ground for the sending unit Ill check that out. I am just unsure what wires to follow for...

Ive finally gotten my sons CUCV buttoned up pretty good and its time to start on mine during this down time. A few issues with wiring have been found. 1. You can turn on the headlights anytime. The switch for the lights next to the blackout lights does nothing to the lights. 2. The fuse for the...