Results 1 to 3 of 3

Thread: Help Finding Orings for MRAP Tire Valve

  1. #1
    Private zer0's Avatar
    Join Date
    Jun 2016
    Location
    Temple, PA
    Posts
    8
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Help Finding Orings for MRAP Tire Valve

    Hello.

    I was hoping to see if anyone could point me in the right direction for the O-Rings for these little tire valve things. Dimensions, or maker or anything would help. they came on the 20 Bolt Aluminum MRAP wheels.

    I also wanted to see if anyone knew what type of schrader is on it, I have another missing a schrader.

    Thank you very much for any help you can give.

    IMG_0091.jpgIMG_0092.jpg

  2. #2
    Corporal
    Join Date
    Jul 2017
    Location
    Mustang,Oklahoma
    Posts
    26
    Thanks
    1
    Thanked 24 Times in 12 Posts

    Default

    I just matched the O-rings up at a local truck supply shop. Call a local military base or armory unit and they can help you on the valve.

  3. #3
    2 Star General lindsey97's Avatar
    Join Date
    Jul 2014
    Location
    wynnewood, oklahoma
    Posts
    736
    Thanks
    1,357
    Thanked 518 Times in 289 Posts

    Default

    Probably a 1/8" or 1/4" npt scrader valve. Take assembly to a plumbing store and figure out thread size. Looks like 1/8" npt. Then get on ebay and order correct scrader valve assembly in stainless. They make brass or stainless. Same part as on a paintball tank, scuba tank, or dirtbike shock.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •