Help Finding Orings for MRAP Tire Valve

Steel Soldiers is supported by:

zer0

New member
9
0
0
Location
Temple, PA
Hello.

I was hoping to see if anyone could point me in the right direction for the O-Rings for these little tire valve things. Dimensions, or maker or anything would help. they came on the 20 Bolt Aluminum MRAP wheels.

I also wanted to see if anyone knew what type of schrader is on it, I have another missing a schrader.

Thank you very much for any help you can give.

IMG_0091.jpgIMG_0092.jpg
 

lindsey97

New member
736
1
0
Location
wynnewood, oklahoma
Probably a 1/8" or 1/4" npt scrader valve. Take assembly to a plumbing store and figure out thread size. Looks like 1/8" npt. Then get on ebay and order correct scrader valve assembly in stainless. They make brass or stainless. Same part as on a paintball tank, scuba tank, or dirtbike shock.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks