Results 1 to 1 of 1

Thread: PRC-138 into a Sincgars MT-6576 mount

  1. #1
    4 Star General
    Join Date
    Sep 2008
    Location
    San Jose, Ca
    Posts
    1,345
    Thanks
    96
    Thanked 695 Times in 421 Posts

    Default PRC-138 into a Sincgars MT-6576 mount

    I have been running an RT-1439 in my M996A1 ambulance for years now and recently decided to update to a PRC-138. I didn't want to outright replace the 1439 and and didn't want to add another mount because of space considerations and reasoned I could come up with a way to mount the 138 into the Sincgars mount. It's a fairly simple solution actually. I sectioned about 1 3/8" out of one of the 138 wide plastic battery boxes and installed the power connector from an old AM-2060 harness I had laying around. This shortened the length of the RT to allow some new hold down clamps to hold either radio into the mount. Now I can slip either RT into the truck depending on what I want to do.

    Sincgars:
    Sincgars radio setup.jpg

    PRC-138:
    20191002_150318.jpg

  2. The Following User Says Thank You to papakb For This Useful Post:

    Wire Fox (10-27-2019)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •