PRC-138 into a Sincgars MT-6576 mount


Well-known member
San Jose, Ca
I have been running an RT-1439 in my M996A1 ambulance for years now and recently decided to update to a PRC-138. I didn't want to outright replace the 1439 and and didn't want to add another mount because of space considerations and reasoned I could come up with a way to mount the 138 into the Sincgars mount. It's a fairly simple solution actually. I sectioned about 1 3/8" out of one of the 138 wide plastic battery boxes and installed the power connector from an old AM-2060 harness I had laying around. This shortened the length of the RT to allow some new hold down clamps to hold either radio into the mount. Now I can slip either RT into the truck depending on what I want to do.

Sincgars radio setup.jpg

AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks