M105A3 trailer tailgate pics needed

Anyone have pics of the ladder assy in the tailgate on the M105A3 trailers??

Thanks

Justin

Sorry no pictures but they are just held on by 2 hinges on the left side of the gate. If I remember correctly the wheel wells are only about 3" deep.

There are some with images on GL right now.

Andy..

Well no need to mention where they are.

Without having my camera handy, here is the ladder on my M105a3 trailer.

If I get a chance in the next couple of days I'll take some better pics.

thanks...

thanks for the info. I am going to try one on one of my bobbers. I don't know if the shallow wells will cause drama with the rear tires or not.

justin
979 997 3112

wehring said:

thanks for the info. I am going to try one on one of my bobbers. I don't know if the shallow wells will cause drama with the rear tires or not.

justin
979 997 3112

Click to expand...

I did some preliminary measurements to see about putting one of mine on a 5 ton bob. It looked like you would want maximum tire width in the rear to clear those inner fenders. I hooked up the M105A3 to the M818 to get an idea of how things would look from the rea. I personally think the wider bed will look better. I think HEMTT wheels will work with the hubs flipped. I'm interested to see how it goes for you.

Justin, here are what pictures I have on my computer. Let me know if you need something else, or closer pics, or...?

Cheers

.

Yep a M105 bed is pretty narrow on a M800 series 5 ton, a wider bed would look better.