• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

10KW SF-10-MD and MEP-018A differences

cranetruck

Moderator
Super Moderator
Steel Soldiers Supporter
10,350
74
48
Location
Meadows of Dan, Virginia
Questions; what are the differences, do they use the same regulator? They are both 10KW gensets, is it just a matter of age/upgrade? I have the manuals for the SF unit and would like to know if they apply to the MEP too.

Thanks,
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,813
113
Location
GA Mountains
Same difference Bjorn. I have one of the changes to the paper manuals that indicate to cross out SF-10-MD and put MEP-018A. From what I understand there are 3 different regulators used on the genset. One is an open frame and that is reportedly the repairable one. The genset in question has one of these. I also have a different design that hasn't been tested. Thats yours too. Also, the open frame regulators are the same on 3, 5 and 10KW sets.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks