rick martin
Member
- 32
- 0
- 6
- Location
- wilkes barre pennsylvania
I only have low speed how do I test to see if switch is working
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1985 m1010 wiper motor
- Thread starter rick martin
- Start date
The TM 9-2320-289-20 and the TM 9-2320-289-34 tech manuals have a troubleshooting section for the wiper/washer system.
The -34 manual goes a little more in depth.
Another problem area is the noise suppressors (capacitors) at the wiper motor. They are used with military radios and are not needed for civvy use. You can remove them.
The -34 manual goes a little more in depth.
Another problem area is the noise suppressors (capacitors) at the wiper motor. They are used with military radios and are not needed for civvy use. You can remove them.
chevymike
Well-known member
- 586
- 459
- 63
- Location
- San Diego, CA
I had this issue and once I removed the noise suppressor that plug inline, the wipers worked as they should. It's all plug and play, so really easy to do.