3053A U joint size

[sermis]

What size u join is on the 3053A transmission?

 

[m-35tom]

BIG 4 are # 332 they are the big ones, 4 are # 330 and are the smaller ones.

 

[sermis]

Is that a spicer number?
I have a chart but can't find them.
http://www2.dana.com/Expert/wc.dll?hvtss~dedsec~2~13~06~

 

[m-35tom]

precision number, any parts place should be able to cross them. i got mine at parts depot. very expensive.

 

[gimpyrobb]

Od iron has them

 

[sermis]

Well I am really looking for a converson to go from the deuce to a 1310 if they make one. If I knew the size I would have a place to start.

 

[sermis]

I found a converson from the 1310 to a 1350 for the rear of my M725 to CCUV axle. Now need to go from the 3053A to the jack shaft and axle which are 1310's.

 

[m-35tom]

so you need to go from a 1332 to a 1310?

 

[sermis]

On my Dana chart I don't see a 1332 even listed. I need to go from what ever the U joint is on the deuce trans to a 1310.

 

[m-35tom]

well i was just guessing that they put a '1' in front of the joint number to make their number. call paul at national truck parts, 918-660-0310. there is probably a rear drive flange to put on the 3053 to make it work, he will know.

 

[mudguppy]

i came across this thread because i needed to research the size of the u-joint. thought i'd update with my findings:

the small u-joint is indeed the precision no. 330; Spicer 1410 series, plain journal 1.188"D x 4.188"W. Napa PN: NPJ330

the large u-joint is indeed the precision no. 332; Spicer 1500 series, bearing plate style 1.562"D x 4.562"W. Sermis could not find this joint on the link above because it is a 'BP' style, and the chart was for 'OSR' (Outside Snap Ring) style. Spicer 1500 BP Style

now, what I need is a conversion u-joint that combines these two: Spicer 1410 to 1500BP. they don't make one...