• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

315/75r16 fit stock m1008

dayers024

New member
8
0
1
Location
Remington, VA
I know I've seen post before but I can't find them in my search!!! Maybe because I'm on tapatalk? But anyways will 315/75r16 fit stock ride height without trimming?
 

mike634

Member
Steel Soldiers Supporter
94
47
18
Location
Sussex New Jersey
I tried to fit them om my stock 1028. They do hit the front fender edge a little but my biggest issue was that they rub on the frame when turning. I would have had to adjust the stops out to far for my liking
 

Ilikemtb999

Active member
696
45
28
Location
Denver, CO
Not sure how similar but I've got that size tire on my m1009 with a 2" lift and I had to trim the front fenders on both ends. I also have 4.5" backspacing on my wheels (which was as far in as I could find to tuck the wheels)
 

red

Active member
1,988
23
38
Location
Eagle Mountain/Utah
You'll have to trim. Largest that will fit stock without trimming and allow full axle articulation is 32x12.5".


If you're willing to trim (alot) you can fit the humvee 37"s at stock height. That's what I run on my 82 k20

IMG_20160430_110112738.jpg
 
Top