• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

4x4 question

Zero_cool

Member
235
1
18
Location
Virginia,Minnesota
my tranny guy just put the 700r4 in my 1028 but he didnt adjust the transfer case linkage,so my transfer case was in 4 high and the hubs were not locked.
Not knowing this i drove it down the highway about 30 mile @ 70 mph.
According to him my transfer case did not get damaged.
Is there anything else that could have been damaged in doing this.
 

WARWAG

Active member
Im sure its time for an oil change on your Tcase anyway. This would be a great time to do it. As far as running your Tcase in Hi for 70 miles is nothing new. I run my Tcase in 4 Hi all the time during the winter time. I also run it in 4 hi when ever Im off road. Nothing she wasnt designed to do.
 
Last edited:

Zero_cool

Member
235
1
18
Location
Virginia,Minnesota
Well according to the gear ratio calculator with my tranny and tc and tire size @ 65 mph in 4th gear rpm is @ 2123 @ 75 mph rpm is @ 2450 Sounds a little off to me but i will know for sure when i install my tach next week i will post results
 
Top