6.2 oil pan torque specs...

[Matt Kahle]

I was wondering if any one here can get me a check list for the oil pan torque specs. I remember seeing some old post on 6.2 ,but can't find them.

Okay I know you guys are going to say read the TMs. I really can't scroll around the TMs through different pages for spects with oily hands. Thanks for any help.

 

[Warthog]

The manual doesn't list any torque specs for the oil pan.

There is a paragraph in the PMCS section that says to check the oil pan bolts semi-annually and tighten them to 5 ft-lbs.

There is a list at the back of the TM 9-2320-289-20 that has general specs



Looking thru the 6.2L/6.5L HMMWV egine manual TM 9-2815-237-34 it shows 48-120 lb-in for the side screws and 156-240 lb-in for the rear main screws

 

[Matt Kahle]

Okay thanks W.H.

 

[Speddmon]

Just in case you don't have a torque wrench scaled fo lb-in, there are 12 lb-in and 1 lb-ft. Just like measuring distance 12 inches per foot.