itsunday25
New member
- 101
- 0
- 0
- Location
- pennsylvania
k i got cucv i put a new 6.5 ip in my truck but i left the 6.2 in injectors in it will i get more power if i put the 6.5 injectors in it or should i just leave the 6.2 ones in it thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
6.5 ip with 6.2 injectors
- Thread starter itsunday25
- Start date
dstang97
Well-known member
- 1,861
- 33
- 48
- Location
- Clover, SC
Unless you have a turbo leave it alone. Is it a 4911 pump?
67_C-30
New member
- 645
- 6
- 0
- Location
- Sweet Home Alabama!
Ditto. The 6.5 pumps flow a lot of fuel for a N/A 6.2.
itsunday25
New member
- 101
- 0
- 0
- Location
- pennsylvania
so dos thes mean i should put the 6..5 ones i got in it ?
67_C-30
New member
- 645
- 6
- 0
- Location
- Sweet Home Alabama!
Is you IP from a 6.5 naturally aspired engine or a 6.5 turbo engine?
dstang97
Well-known member
- 1,861
- 33
- 48
- Location
- Clover, SC
It all depends There a 6.5 NA and turbo injectors. The 6.5 pump can put out more fuel than a 6.2. If you do not have a turbo you can put in 6.5 injectors but make sure you detune your Injection pump. There should be the tinyest little puff of black smoke under hard acceleration. If I had to guess I would say pump maxed out back off 3/8