8.3 turbo pipe gasket?

[ghitch75]

looking for part # for the gasket between the turbo and the header pipe.......

 

[simp5782]

NSN 5330-01-374-0400

Bosch Number is 12256082-1

Available on fleabay and from Oshkosh Equipment.

Cross-Sectional Shape Style	Metal with soft filler
Outside Diameter	4.560 inches nominal
Aperture Diameter	3.900 inches nominal
Cross-Sectional Thickness	0.030 inches nominal

 

[Ford Mechanic]

NSN 5330-01-374-0400

Bosch Number is 12256082-1

Available on fleabay and from Oshkosh Equipment.

Cross-Sectional Shape Style	Metal with soft filler
Outside Diameter	4.560 inches nominal
Aperture Diameter	3.900 inches nominal
Cross-Sectional Thickness	0.030 inches nominal

Thanks! I never did find one and the one at the turbo is different that the rest of the joints.

Sent from my SM-G900V using Tapatalk

 

[ghitch75]

NSN 5330-01-374-0400

Bosch Number is 12256082-1

Available on fleabay and from Oshkosh Equipment.

Cross-Sectional Shape Style	Metal with soft filler
Outside Diameter	4.560 inches nominal
Aperture Diameter	3.900 inches nominal
Cross-Sectional Thickness	0.030 inches nominal

thanks for finding that.........those are the muffler gaskets.......the turbo gasket is 3.25" to 3.85" same thickness....i found them to on flebay too.....so the search goes on....

 

[simp5782]

Post a pic of your engine serial number so it will make it easier to find in the catalog

Sent from my SM-G860P using Tapatalk

 

[ghitch75]

thanks for all who looked for it.......i just took exhaust cement and glued it together and put it in........no leaks and the truck runs great with the new 5" exhaust.....

 

[Ford Mechanic]

Found the gaskets, tried to upload earlier but server was busy so I took a pic of my notes. Got these numbers from Memphis Equipment, they have them in stock.

Sent from my SM-G900V using Tapatalk

 

[Ford Mechanic]

For those who can't get the pic. ....
5330-01-3615600 pipe to turbo
5330-01-1047354 pipe connection gaskets

Sent from my SM-G900V using Tapatalk

 

[ghitch75]

thanks Ford!!......i'll get one and put it back in case my glue job lets go....