923 alternator wiring question

[Stevepala]

Can someone tell me what is the output/purpose of each of the two electrical studs and one wire connector on the alternator.

I'm in the process of finishing my big cam 450 swap and will be using a commercial truck alternator and need to id the military alternator connection to complete the swap.

The commercial alternator is a single wire.

thanks

steve

 

[tractors0130]

All you need is the 1 large positive for the single wire alternator with the 1 ground wire hooked to the body of the alternator. The small Excitor wire and any others can just be taped up and left disconnected. This is what I had done on an M925A2 for a 1 wire 24v alternator and it worked fine.

http://www.steelsoldiers.com/showthread.php?85317-M925A2-Delco-Style-Alternator

 

[Stevepala]

Thanks, I was hoping it would be that easy.