• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

A Tale of Two Fuel Tanks...it's a tankless job

Wreckclues

Well-known member
Steel Soldiers Supporter
266
727
93
Location
Jefferson, Massachusetts
Just checked the Manual Fig. 46 TM 9-2320-260-20P lists the assembly as "vent". Parts list doesn't get into a lot of detail of the "whatsit", looks like the pipe bushing fits into it, but it's not shown.

Screenshot 2025-09-19 at 8.30.02 AM.pngScreenshot 2025-09-19 at 8.30.18 AM.png
 

Wreckclues

Well-known member
Steel Soldiers Supporter
266
727
93
Location
Jefferson, Massachusetts
The whatsit appears to be a pressure regulator. The top part vents freely to atmosphere. I filled the lower part with penetrating oil and charged the vent lines to 15 psi. Observed air fizzing through the oil.
See attached video


20250919_114101.jpg20250919_114109.jpg.

So this isn't a static situation and the length of tubing does reflect the pressure of the tank.
 

msgjd

Well-known member
1,338
4,095
113
Location
upstate ny
okay, thus it must also be affected by altitude .. So,,, with the Whatsit being mounted high on the firewall out of danger of fording operations, you add your current land elevation plus Whatsit height on truck, then multiply the result of the given polynomial by 1/3rd, then square that, then divide the result by the number of slices of pi(e) you had this month :D

you are doing good work with this mystery !
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks