• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Allison tranny question / help

hank2424

New member
50
0
0
Location
Lincoln, ne
Ok here we go, when i put trannyin 1-2, it will shift 1st, 2nd and then shift 2 more times before i manually go to 1-3 and so on, with same shifting issues. Is this normal or does tranny need adjusted? Please help!!
 

Suprman

Well-known member
Supporting Vendor
6,844
658
113
Location
Stratford/Connecticut
When you put it in drive does it go thru the gears properly? Did you check the fluid level with the engine running in neutral? How did the fluid look and smell? Does it still have oil in it or allison trans fluid?
 

hank2424

New member
50
0
0
Location
Lincoln, ne
still has oil in it, oil looks clean and not burnt. checked in neutral and fluid is reading full. when I put it in 1-5 it seems to shift ok but a little fast, then I have to down shift manually to get it in the sweet spot and not lug the engine.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks