velociT
New member
- 853
- 4
- 0
- Location
- Burnet co. Texas
Pic below:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Another what is this thread...
- Thread starter velociT
- Start date
WyoDeuce
Member
- 236
- 0
- 16
- Location
- Laramie WY 7220 ft.
Flux capacitor. Have you had it over 88 mph yet..............?
Bob H
Well-known member
- 3,148
- 167
- 63
- Location
- Huron National Forest, Michigan USA
Manifold heater for the cold starts, likely not needed in Texas
mattg2448
New member
- 328
- 4
- 0
- Location
- Port Huron, Michigan
Something that was covered?
wsucougarx
Well-known member
- 6,949
- 65
- 48
- Location
- Washington State
Looks like a white or hercules engine. There is indeed a cover missing. Also looks to the original engine...not a rebuild
Awesome VelociT, you got your M35A2C!
Awesome VelociT, you got your M35A2C!
Last edited:
velociT
New member
- 853
- 4
- 0
- Location
- Burnet co. Texas
Not my truck guys, just found the pic...
I thought those two things were mounted on top of the usual cover that was there...
I thought those two things were mounted on top of the usual cover that was there...
Barrman
Well-known member
- 5,460
- 2,188
- 113
- Location
- Giddings, Texas
You for sure don't need it here. Mine leaked oil a year or so ago and the truck started just fine without during our cold winter.
I like the flux capacitor answer.
I like the flux capacitor answer.
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
It's called a flame heater, injects diesel through a nozzle and ignites it with a spark plug to "light the fires" as it were!
Thats why the label by the button says "use only while cranking the engine". I have one on mine here in Florida!
Not much use to me down here.
Thats why the label by the button says "use only while cranking the engine". I have one on mine here in Florida!
Not much use to me down here.