fullthrottle46
New member
- 26
- 7
- 3
- Location
- Vancouver, WA
Hey Guys,
My M1031 was converted to 12v, box scrapped by an imbecile and I'm having some electrical starting issues, you can see the link below.
I'm wondering what I've missed? This #16 fusible link melting then somehow turning into a wire that will turn the starter over and start the truck when you reconnect is baffling to say the least.
Has anyone done the 12 V conversion differently than the rosecommon method?
Any and all info is greatly appreciated thank you.
My M1031 was converted to 12v, box scrapped by an imbecile and I'm having some electrical starting issues, you can see the link below.
UPDATE: Melted #16 Fusible Link, Won’t Start
UPDATE: So it cranked over when I reattached #16 (not #6 like I thought it was) momentarily until it started. I'm still baffled though as this was connected all along before it melted. Hey guys, I’m wondering what this Number 16 fusible link goes to/ does? Mine has been attached to the...
www.steelsoldiers.com
I'm wondering what I've missed? This #16 fusible link melting then somehow turning into a wire that will turn the starter over and start the truck when you reconnect is baffling to say the least.
Has anyone done the 12 V conversion differently than the rosecommon method?
Any and all info is greatly appreciated thank you.