- 212
- 78
- 28
- Location
- Rushville, IN
As the title says......
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Any idea what might have been mounted here?
- Thread starter galaxie428
- Start date
- 1,652
- 2,095
- 113
- Location
- Rosamond, CA
Maybe an On / Off switch with the elongated top hole? Guessing for a flashing beacon light.
Could be anything, CAMO
Could be anything, CAMO
- 1,167
- 376
- 83
- Location
- Guymon, OK
Ir lights switch is my guess
donquijote
Active member
- 166
- 36
- 28
- Location
- Louisiana
Probably one of these, which controls a hazard light or other light.
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
papakb
Well-known member
- 2,288
- 1,185
- 113
- Location
- San Jose, Ca
It's a standard military switch like those mounted in vehicles like the CUCV. Only more poorly done. It could have been for anything that needed to be turned on and off.
- 3,257
- 2,987
- 113
- Location
- Brooklyn, NY
Search under the dash for unused free wires and see where they go. Look for drilled aftermarket holes and see where they lead.
Maybe fill it with a switch or place a small reproduction military placard over it?
Maybe fill it with a switch or place a small reproduction military placard over it?
- 10,156
- 5,833
- 113
- Location
- Camp Wood/LC, TX
Dis one
Attachments
Crapgame
Well-known member
- 624
- 316
- 63
- Location
- Navarre, FL
Rotating Amber Warning Light RAWLs or I've seen another switch to something associated with Maintenance Trucks for a On/Off Welding Mode.
Attachments
- 212
- 78
- 28
- Location
- Rushville, IN
Thanks for the feedback. I'll look for some loose wires behind the dash to see where they go. The holes don't bother me, just more curious as to what might have gone there and if was anything I should try to hook back up and make work. Thanks guys.
- 4,257
- 3,860
- 113
- Location
- Brentwood, Calif
Standard location for the toggle switch for IR lamp