Anyone have a napa number for 923 a2 transfer case hi/low shaft seal?

[Mopwr]

Looking for a napa part number or any vendor info for a 923 A2 transfer case hi/low shaft seal.

 

[shadowdd]

Let me look, I just bought one of those.... I should still have the number otherwise I should be able to read the number on the seal.

Thanks, Bryan

 

[Mopwr]

Thanks Bryan, let me know if you find it.

 

[doghead]

Have you tried google searching the NSN from the parts TM?

 

[Mopwr]

Haven't tried that yet. I've done that with several other parts without much luck.

 

[shadowdd]

Thanks Bryan, let me know if you find it.

254

Hi-Lo Shaft Seal

A-1205-P-1758

5330-01-132-8346

Here is a site with a long list of direct interchange parts for those seals

http://www.autopartoo.com/oem/partscrossinterchange.html?search=a1205p1758

I hope that helps.... It is a breeze pulling and replacing the seal, just make sure that the shift shat is clean of paint before the new seal goes in!!

Thanks, Bryan

 

[Mopwr]

Thanks Bryan, did you use a transmission seal puller for removal? If not, what do you recommend?

 

[shadowdd]

Thanks Bryan, did you use a transmission seal puller for removal? If not, what do you recommend?

Nope, just used two self tapping screws and pliers.... Pulled evenly.... I did have to score the paint from around the seal so it would come out.

Bryan

 

[Mopwr]

Nope, just used two self tapping screws and pliers.... Pulled evenly.... I did have to score the paint from around the seal so it would come out.

Bryan

Thank you.

 

[Crf450x]

Since this is the only thread that comes up when searching the nsn…...for future reference, the national part number is 471224