anyone tell from pics what generation 5ton ?

[sweetk30]

friend sent me this and asked if i wanted it . he knows the seller and no other info . thanks for any info .

my guess A2 being singled out and hydro steer ram on pass side . but i am not as familur with 5ton . if i had to guess the plans were bob it to 4x4 with trailer suspension and bed behind it .

has not run in 4+ years and told it had noise when running last time . price is cheep even if parted out = make money and semi local and i know a tow truck guy to bring it to me .

 

[cbrTodd]

friend sent me this and asked if i wanted it . he knows the seller and no other info . thanks for any info .

my guess A2 being singled out and hydro steer ram on pass side . but i am not as familur with 5ton . if i had to guess the plans were bob it to 4x4 with trailer suspension and bed behind it .

has not run in 4+ years and told it had noise when running last time . price is cheep even if parted out = make money and semi local and i know a tow truck guy to bring it to me .

View attachment 952734

It does not appear to have the shackles under the front bumper, which a M923A2 should have. It also looks like the rear axles are the non-CTIS version. I think it is either a M923 that has had super singles added, or a M923A1. The width of the spare tire carrier (whether it fits a super single tire or not) should help determine which one. Either way I think it should be a NHC 250 powered truck.

Side note, the front wheel looks like a HEMTT wheel to me, not a 5 ton combat wheel. Not 100% sure on that but the offset doesn't look right for a combat wheel.

 

[US6x4]

If the fuel filler neck on the tank is angled then it's an A2. If the filler neck is horizontal then it's an M923/A1